Packaging case study / Creative and marketing projects
10 Two-Piece Boxes for a Phone Presentation
A phone-presentation project called for a very small packaging run. The order specified 10 two-piece boxes with foam inserts and matte lamination.
The 7 × 4 × 1.125-inch dimensions created a shallow rectangular enclosure around the presentation.
Project overview
| Project detail | Specification |
|---|---|
| Client sector | Creative and marketing projects |
| Intended use | Phone presentation |
| Box style | Two Piece Boxes |
| Dimensions | 7 × 4 × 1.125 inches |
| Quantity ordered | 10 |
| Internal configuration | Foam inserts |
| Finish | Matte lamination |
Finished project gallery
Project photographs will appear here.
Finished box, interior views and close-up details.
A phone presentation in a ten-box quantity
The recorded contents were phones. The brief connected that application to a quantity of 10 rather than a large-volume packaging programme.
The foam insert was part of the specification, giving the interior its own physical component within the shallow format.
Foam within a shallow two-piece box
The two-piece construction supplied the enclosure style. The rectangular plan and 1.125-inch depth were defining physical details for the phone presentation.
The item and foam need to be considered together within that format. The insert contributes to the presentation arrangement, while the outer dimensions define the enclosing box.
A matte surface around the internal presentation
Matte lamination specified the low-gloss finish. It surrounded the foam-based interior without an additional documented foil or ribbon treatment.
The project therefore placed emphasis on a particular box profile and internal component. Its scale came from the phone presentation and ten-box quantity.
A small-run phone-box specification
This order combined 10 two-piece boxes, foam inserts and matte lamination in a 7 × 4 × 1.125-inch format.
It illustrates a concise presentation-packaging brief with specific dimensions and an internal insert material, even at a very small quantity.
Developing a small-run device presentation?
Share the device dimensions, any accessories, insert requirements and quantity. We can discuss the two-piece enclosure around the complete arrangement.