Packaging case study / Consumer products
50 Two-Piece Product Boxes with EVA Foam Interiors
A specialist consumer-product order called for a two-piece box with a substantial internal component. The specification paired 50 boxes with EVA foam, custom printing and matte lamination.
At 9 × 8.75 × 3 inches, the enclosure had an almost square footprint and room for a relatively deep presentation.
Project overview
| Project detail | Specification |
|---|---|
| Client sector | Consumer products |
| Intended use | Specialist consumer-product presentation |
| Box style | Two Piece Boxes |
| Dimensions | 9 × 8.75 × 3 inches |
| Quantity ordered | 50 |
| Internal configuration | EVA foam |
| Printing | Custom printing |
| Finish | Matte lamination |
A product presentation built around the interior
The project combined an enclosing box and an EVA foam interior. That put the contents arrangement at the centre of the packaging specification.
The near-square footprint gave the layout a broad presentation area. The 3-inch depth added another important dimension when considering the product and foam together.
Two-piece construction with EVA foam
The two-piece style established the enclosure, while EVA foam supplied the internal material. These components define different aspects of how the package is arranged and opened.
The 50-box quantity was tied to a particular combination of dimensions and interior treatment. It was a specified product presentation rather than a box style alone.
Matte printing around the product presentation
Printing provided the branded exterior, with matte lamination setting the surface finish. The low-gloss treatment was distinct from the EVA foam material used inside.
That separation matters visually. The exterior introduces the package, while the internal configuration establishes the arrangement revealed on opening.
A 50-box specification with a defined foam interior
The order combined a near-square two-piece format, EVA foam and matte-laminated printing.
Its most useful detail is the relationship between the enclosure and interior. Both were present in the brief, giving the project a clear physical configuration.
Planning a product presentation with a foam interior?
Share the complete product arrangement, dimensions and artwork. We can discuss the box construction and foam configuration for your quantity.